Complaint volume
347 consumer-submitted complaints are matched to this model year. Treat the count as a research signal, then read the actual summaries for repeated symptoms.
Complaint records
347 consumer-submitted complaints on record for the 2022 Jeep Grand Cherokee, grouped by component category.
Buyer interpretation
Complaint records are most useful when they turn into inspection points, seller questions, and comparison checks against nearby model years.
347 consumer-submitted complaints are matched to this model year. Treat the count as a research signal, then read the actual summaries for repeated symptoms.
The most common categories are electrical system, forward collision avoidance, unknown or other. Use those categories as a test-drive checklist instead of judging the vehicle from the total count alone.
Enriched records include 13 crash reports, 0 fire reports, 5 injury reports, and 0 fatality reports. These fields come from complaint records and should be read in context.
Mileage is available on 40 complaints, with an average reported failure mileage of 22,854 miles. Compare that with the mileage on the listing.
Build a buyer checklist to turn these issues into questions and inspection points.
347 total complaints on record
| Date | Component | Summary | Severity | Mileage |
|---|---|---|---|---|
| Aug 2025 | POWER TRAIN,VEHICLE SPEED CONTROL,SERVICE BRAKES | I am a victim of SUA (sudden unintended acceleration. I entered my driveway and had my foot on the brake petal. Before I could shift into Park, the vehicle revved to a high RPM and then took off like a rocket. Brakes were initially hard to press and then the petal went to the floor, and I lost the brakes. This all happened very quickly and took me by surprise. I crashed through a double cyclone gate, closed garage door, back of the garage, double fence in back of garage, neighbors jacuzie and shed, hit the side of another neighbor's house and AC unit. It seemed that the power train electronics malfunctioned and caused all of this. Progressive insurance took procession of the vehicle and declared it a total loss. | Crash: Yes Fire: No Towed | Unknown |
| Aug 2025 | POWER TRAIN,ELECTRICAL SYSTEM,SERVICE BRAKES | Multiple warnings with the service hybrid system alert coming on the dash. Code B273C-00 was confirmed by the technician at the Napleton Jeep service department. Vehicle can shut off at any time at any speed and there is no resolution at this time to fix the issue. When accelerating over uneven surfaces, the vehicle bucks back and forth violently. This concern was verified with the technician at Napleton Jeep. The shop Foreman contacted Chrysler zone engineering and confirmed that they are aware of this issue but there is no current resolution for this issue. This is highly dangerous when pulling out into traffic. | Crash: No Fire: No | Unknown |
| Aug 2025 | POWER TRAIN,ELECTRICAL SYSTEM | While driving on the freeway, the vehicle suddenly lost all power and control. The “Service Hybrid System” warning began flashing, and I experienced a complete powertrain failure. As the vehicle coasted down to under 5 mph, it abruptly slammed into the electronic parking brake and came to a hard stop. This created a serious safety hazard not only for me but for other drivers on the road. The vehicle had to be towed to the dealership, where it required a jump-start to regain power. The dealer has been unable to replicate the issue, and no diagnostic trouble codes were found during their scan. Despite this, the failure was severe and unpredictable. There were no warning lights or symptoms prior to the event. The vehicle is currently at the dealership and available for inspection. | Crash: No Fire: No | Unknown |
| Aug 2025 | POWER TRAIN,ELECTRICAL SYSTEM,FUEL/PROPULSION SYSTEM | On three different occasions, the Jeep randomly turned off on its own. Each time I was stopped, so thankfully I was not injured. I brought it to two different dealerships, one in May 2025 and one in July 2025, and neither of them could fix it. The last dealership advised me not to drive the vehicle due to the safety implications of a stall during driving due to "the digital crash input issue". As a result, I sold my Jeep and bought another vehicle. The vehicle was still under warranty when I sold it. | Crash: No Fire: No | Unknown |
| Aug 2025 | ELECTRICAL SYSTEM,UNKNOWN OR OTHER | Car completely shut off while saying the electrical hybrid system needed to be serviced. Car turned back on and light was off. Check engine light going on and off as well. When going lower speeds the cars rpms rev all the way up, almost to the red, and while your pressing the gas doesn’t move but then jerks and goes forward. Your head slams into the seat and it’s extremely unsafe especially if you are in stop and go traffic. The car has been spitting and sputtering. Brought it to the dealership I just purchased it from, I’ve only made one payment. They stated that Chrysler is aware of the problem but that there is no solution as of right now. Extremely unsafe to drive and do not feel safe with my daughter in the car with the car jerking forward and being delayed with the gas and rpms increasing. | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,ENGINE,FUEL/PROPULSION SYSTEM | Total loss of power while driving I got a red wrench hybrid system warning light when driving at 45 MPH. The 2022 Jeep Grand Cherokee 4XE lost all power and a warning that told me to pull over when it was safe. The total loss of power almost cause an accident. I waiting a few minutes and the vehicle started up and I drove home. I am reluctant to drive the vehicle. | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM | Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,FORWARD COLLISION AVOIDANCE | "Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken the vehicle to the dealer recently and they performed an update when the radio was blank and AM radio failed to function. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,SEATS,FORWARD COLLISION AVOIDANCE | Instrument panel switches to Italian, forward collision off light gets stuck on and my seat moved abruptly while I was driving down the road. I have taken my Jeep into the dealership last year for this problem, it was “fixed” but has come back. Noticed the light stuck on last week. Today while I was driving the panel changed to Italian and my seat moved abruptly. Many people on online forums express experiencing the same problem. | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN,ELECTRICAL SYSTEM | Car has a defective hybrid battery that is unrepairable by manufacturer and the vehicle will turn off while driving | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM | While driving on the highway the vechile showed a hybrid error on dashboard then completely shut down. In order to move I had to stop and restart the car. | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,VEHICLE SPEED CONTROL,ENGINE | While driving the vehicle, several warning lights activated, the first being automatic emergency braking is disabled. The second warning light advised me to not turn the car off until I got to my destination. It further advised that I would not be able to shift gears. The vehicle began to slow down on its own until it came to a complete stop. I was in the middle of an intersection when this happened. The dashboard was displaying a message saying press brake and push button to start car. Nothing happened when I did that. I could not shift gears or get the vehicle to move at all. Even though, I was getting the message to push the button to start the vehicle, I believe the vehicle was actually on. I was stuck near the intersection for one hour with a tow truck on the way when I was finally able to turn the e vehicle off. When it turned back on, the check engine light was on and the vehicle was able to drive. It has now happened three times. | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN,FUEL/PROPULSION SYSTEM | While driving in Hybrid mode, the Jeep threw itself into park. I was at the middle of an intersection. I put it back in drive, then it did it again once I started moving. 1. The hybrid mode threw the car into park while moving. 2. This happened to me a few times in a row, but once in the middle of a major intersection. I was lucky there were no cars that crashed into me. 3. I have brought this into Chrysler, Jeep, Doge of Paulding (Georgia) and they have reached out to the engineers at Chrysler. The service department is telling me that Chrysler is telling them there is no fix to this. I put in a ticket with Chrysler as well and they confirmed this. My ticket number is 93581933 4. the vehicle has only been inspected by the service department at the dealership. 5. I did get a hybrid engine maintenance light one time when it went into park. But not each time it did it. | Crash: No Fire: No | Unknown |
| Jul 2025 | STEERING,SUSPENSION | I bought this Jeep new in 2023 and it started making this noise when it had 7000 miles on it. If was normal operational noise, why didn't it have it when it was new? Many owners on Jeep forums (JeepGarage, WLJeepForum, JeepForum, WranglerForum) report: Rattle starts light and worsens with heat soak. The company often states it is a “normal operational noise. ”Some report replacement of the entire sway bar disconnect actuator assembly under warranty resolving the noise temporarily or permanently but there is no standardized procedure. After an hour drive, the loud banging noise is huge distraction while driving. I have driven for many years and have never heard anything such as this rattle trap, especially for upward of $80,000, while fearing that it may leave the road at anytime. Any suggestions would be helpful. The worst vehicle I have ever driven and I am [XXX], INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN,FUEL/PROPULSION SYSTEM | Within days after completing the 95b recall (24v-720) on my Grand Cherokee 4xe PHEV , the vehicle would periodically flash an error message saying ”service hybrid system” or something to that effect. It would illuminate for just a few seconds. On May 21, I took the vehicle back to the dealership (Brigham-Gill, Natick, MA). They read several codes and after conferring with Jeep, said the vehicle is unsafe to drive. It has remained there parked in their backlot as of July 15. The dealership is awaiting guidance from Jeep and informed me they have several others in the same situation. So there were few issues here 1) if I hadn’t returned to the dealership to ask about these brief flashing messages, I would not have known that the vehicle was unsafe to drive. These messages never stayed illuminated for more than a few seconds, and there is no residual “check engine” light. 2) it is incorrect to say that the 95B recall addressed the issue of the failing batteries if it renders the vehicle in operable. 3) the 95B recall patch software was released in January 2025. I find it hard to believe that as of mid July they’ve been unable to find out why it doesn’t work in all the vehicles as intended. This leads me to question the thoroughness of the regression testing before it was released. | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN | The contact owns a 2022 Jeep Grand Cherokee. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated. The contact stated that the unknown warning lights indicated powertrain failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the vehicle had been scheduled for an upcoming diagnostic test. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 50,089. | Crash: No Fire: No | 50,089 |
| Jul 2025 | POWER TRAIN,ENGINE | The red wrench light keeps coming on, Hybrid system needs repair. It looses power for a short period of time, every time has been on the freeway. It makes a hugh crunch noise(transmission) and slams into gear. It is available for inspection, currently at dealership, it has been there for last week. This problem has been persistent, its been in many times for this issue. Chrysler told me they do not have a fix. It is all over the chat forums. We do not feel safe driving this car because it looses power temporarily and on the freeway. Many others are having problems with it stopping from a loss of power. It has been inspected by the dealership and in for repairs many times. This vehicle has been in the dealership on a regular basis since it was new. It has always had a power train issue, clunky and loss of power. Now it is worse and they don't have a repair. It has also had engine lights coming on and off. Had issue with having to put it in park turn off and turn back on to get it in gear. The loss of power on the freeway is the persistent issue right now. These cars need pulled off the roads until they are fixed! | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,BACK OVER PREVENTION,FORWARD COLLISION AVOIDANCE | "Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. I have taken it to the dealer twice, and they say there is nothing they can do and to wait for a possible software update, but none has come and it has been over a year. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] Many people on the forum believe this issue did not start until a software update a year or so ago. This is a well known and widespread problem, and there is even a DOT Bulletin on the issue: dot.report Bulletins Because this is dangerous (for settings/gauges/units to no longer be useful while driving), and it occurs randomly, I strongly believe this issue should be a manufacturer recall. I am available for any needs INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN,ELECTRICAL SYSTEM,FUEL/PROPULSION SYSTEM | Vehicle suffers from a documented hybrid defect (DTC B273C-00) that causes loss of electric propulsion, disables hybrid modes, and triggers "Service Hybrid Electric Vehicle System" warnings. The problem first appeared around Feb 2025 and was confirmed by FCA’s own STAR bulletins and dealership diagnostics. No validated fix exists; dealership only cleared the fault code temporarily. The defect led to: • Power loss during highway merge on [XXX], with children in the car • Sudden unintended acceleration on [XXX] • Persistent warnings and failure to operate in advertised hybrid/electric modes for over 120+ days FCA refused to repurchase, replace, or permanently repair, despite acknowledging the defect and safety risk in internal documents. The vehicle remains in ICE-only mode, depriving it of the key safety and efficiency features it was designed to provide. The defect significantly raises risk of collision due to unpredictable propulsion response, and no dealership or FCA representative provided written certification the vehicle is safe in all drive modes. Vehicle purchased in Wisconsin but always registered and operated exclusively in Illinois. Arbitration through NCDS confirmed the defect exists but denied relief, citing insufficient corroboration. Problem was reproduced and confirmed by certified dealership and documented in service records. This complaint is part of an ongoing concern that hybrid system EMI issues (like DTC B273C-00) pose systemic safety risk and remain unresolved. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,ENGINE | The vehicle will suddenly and without warning lose power while in operation in the middle of traffic. The vehicle will coast to a stop without power, no power steering, no power braking, etc. This is an extreme safety concern. The vehicle losing power in traffic and coming to stop poses serious and great risk to the health and safety of both the occupants and any other vehicles and their occupants on the roadway. This has now occurred multiple times, due to the inability of FCA to repair this defect, my family’s health and safety has been repeatedly endangered and will continue to be endangered with continued use of this vehicle. The most recent occurrence of the vehicle losing power and jeopardizing the life, health, and safety of my family occurred on May 9th, 2025 with the service appointment initiated May 10th, 2025. At this time no further repair attempt has been made by FCA. FCA has finally admitted that this is related to code B273C | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM | Red wrench dash warning comes on alerting an issue with the hybrid electrical system. It has been diagnosed by the dealer multiple times with no resolution and warning it could be related to various emergency systems. This has been ongoing since the potential battery fire software update several months ago. Jeep acknowledges the problem but has no fix for it. | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,FUEL/PROPULSION SYSTEM | The car loses power while indicating a battery failure. It does this both while driving and the when idling. It has done so on the highway in traffic twice and around town a handful of times and routinely will do so when idling. | Crash: No Fire: No | Unknown |
| Jul 2025 | POWER TRAIN,ENGINE,FUEL/PROPULSION SYSTEM | Driving vehicle and it lost all power. Warning light for Service PHEV came on solid on dash. Switched to ESave and was able to drive approx 2 blocks and vehicle lost power again in middle of road. Shifted to neutral, restarted and was able to side of road. Called tow company to deliver to dealer. Side note- vehicle was in dealer on 6/30 with flashing Service PHEV light; dealer ran code and returned with DTC of B273C-00 (Digital Crash Input). Dealer stated that vehicle is going into a “limp mode” due to 95B software update, and that there is not a fix, and other vehicles are at dealership unable to repair. When asked for advice what I should do, the response was “ do not take a long road trip”. I drove approx 60 miles since and the vehicle went into solid limp mode. Being evaluated at dealership currently. | Crash: No Fire: No | Unknown |
| Jul 2025 | ELECTRICAL SYSTEM,FORWARD COLLISION AVOIDANCE | Without warning or being given an option to reject the update, my vehicle was updated to settings that no longer offer paddle shifting or the ability to enable or disable the Pedestrian Emergency Braking (PEB) system. The latter results in being unable to turn off the Forward Collision Off light on the dashboard. The update also wiped out most of my settings and changed units of measure to the metric system. According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |
| Jun 2025 | ELECTRICAL SYSTEM,FORWARD COLLISION AVOIDANCE | Randomly, and without warning, the instruments, gauges, and displays will switch into a language I do not speak or understand (Italian). Coinciding with the switch to Italian language, cluster and radio display settings revert back to default settings, auto door locks and paddle shifter becomes inoperative (with no menu to enable), pedestrian emergency brake (peb) lamp or forward collision warning (fcw) lamp turns on with no way to disable, units of measurement including speed, temperature, etc. all change, and many other random settings change as well. ***This is clearly a dangerous situation because of all the functions and gauges that change, and the fact it is difficult if not impossible to recover from this due to the language of the setting menus, and the complexity of discovering and navigating through all these changes. When this happens, even if one is able to wade through all the settings menus and change setting back, some items cannot be reset (like the FCA off lamp). According to various Jeep owner forums, some dealers have been able to reset something and temporarily correct the issue, but they charge for this service, and the issue returns randomly again. Here is an example forum discussion, indicating many if not all vehicles are affected: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) | Crash: No Fire: No | Unknown |