Recall homework
There are 4 official recalls listed for this model year. Before buying, use the VIN to confirm which campaigns are still open and ask for dealer repair records on completed work.
Vehicle report
2019 Toyota 4Runner
Recalls, consumer complaints, safety ratings, fuel cost estimate, and next steps from official public data sources.
4 Total recalls
Nov 4, 2020 Latest recall date
64 Complaint reports
$2,904 Estimated fuel cost
Buyer interpretation
What this record means before you buy
The useful question is not just whether this page has records. It is what those records should make you verify before money changes hands.
Owner complaint pattern
Owner complaints most often mention unknown or other, fuel system, gasoline, air bags. Scan those categories before the test drive so you know what symptoms, warning lights, or service history to ask about.
Service bulletin signal
156 manufacturer communications are listed. These are not recalls, but they can reveal repair instructions, warranty extensions, software notices, or known service patterns.
Ownership-cost check
The fuel-cost estimate is based on a representative EPA match, not every trim. Confirm the actual engine, drivetrain, and tire setup before comparing this listing with another year or model.
Questions to ask the seller
- Can you show the current VIN recall status for this 2019 Toyota 4Runner?
- Do you have dealer invoices or campaign paperwork for the listed recall repairs?
- Have you noticed any issues related to unknown or other, fuel system, gasoline, air bags?
- Can I review recent maintenance records before the test drive?
Used-car checklist
Thinking of buying this vehicle?
Use our buyer checklist to know what to inspect, ask, and verify before the test drive.
2019 Toyota 4Runner Regular Gasoline
Create checklist Compare with other years Sends year, make, and model to pre-fill your checklist.
Safety ratings
Official safety ratings were found for 2 tested variants of the 2019 Toyota 4Runner.
Safety ratings can vary by tested body style, trim, drivetrain,
or variant. Do not assume every trim has the same rating unless
the official record says so.
| Variant | Overall | Front | Side | Rollover |
|---|---|---|---|---|
| 2019 Toyota 4Runner SUV 2WD Default | 4/5 stars | 4/5 stars | 5/5 stars | 3/5 stars |
| 2019 Toyota 4Runner SUV AWD | 4/5 stars | 4/5 stars | 5/5 stars | 3/5 stars |
How many recalls does the 2019 Toyota 4Runner have?
Verify with official VIN lookup4 official recalls on record for the 2019 Toyota 4Runner. 30 matched quarterly completion reports are available.
Latest recall: November 4, 2020
Recall data is based on official records. This page is not an official VIN
recall check. Always confirm open recalls with an official VIN lookup, the
manufacturer, or an authorized dealer.
Completion reports are campaign-level, delayed, and not VIN-specific.
| Campaign | Component | Summary | Consequence | Remedy | Date | Completion |
|---|---|---|---|---|---|---|
| 20V682000 | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP | Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 4Runner, 2019-2020 Avalon, 2019 Corolla Hatchback, 2017-2019 Highlander, 2018-2020 Camry, 2020 Corolla, 2018-2019 Land Cruiser, 2017-2020 Tacoma, 2019-2020 RAV4, 2019-2020 Sequoia, 2017-2020 Sienna, 2019-2020 Tundra, 2018-2020 Lexus ES350, 2017 Lexus GS200t, 2017-2019 Lexus GS350, 2019 Lexus GS300, 2018-2020 Lexus LC500h, 2019-2020 Lexus LS500, 2018-2019 Lexus GX460, 2017 Lexus IS200t, 2019 Lexus IS300, 2019 Lexus IS350, 2018-2020 Lexus LC500, 2018 Lexus LS500, 2019 Lexus LS500h, 2018-2019 Lexus LX570, 2017 Lexus RC200t, 2019 Lexus RC300, RC350, 2017 and 2019-2020 Lexus RX350, 2018-2020 RX350L, 2019 Lexus UX200, 2018-2019 Lexus NX300 vehicles. The low-pressure fuel pump inside the fuel tank may fail. | If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash. | Toyota will notify owners, and dealers will replace the fuel pump assembly with an improved one, free of charge. Owners of specific models were notified that remedy parts were available starting January 21, 2021. Owners of other models will be notified as remedy parts become available. Remedy parts should be available for all affected vehicles by late March 2021. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Note: This recall is an expansion of recall 20V-012. Toyota's number for this recall is 20TA02. Lexus' number for this recall is 20LA01. | Nov 2020 | 2022-4 |
| 19V670000 | STEERING | Southeast Toyota Distributors, LLC (SET) is recalling certain 2018-2019 Toyota 4Runner vehicles. During installation, certain steering and suspension components may not have been properly tightened. | Loose fasteners may cause a loss of vehicle control, or cause an accessory to detach from the vehicle and become a road hazard. Either of these scenarios can increase the risk of a crash or injury. | SET will notify owners, and dealers will inspect and re-tighten the steering and suspension fasteners as necessary, free of charge. The recall is expected to begin November 19, 2019. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET19B. | Sep 2019 | 2021-3 |
| 19V244000 | EQUIPMENT:OTHER:LABELS | Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." | If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash. | GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1. | Mar 2019 | 2020-3 |
| 18V753000 | EQUIPMENT:OTHER:LABELS | Southeast Toyota Distributors, LLC (SET) is recalling certain 2017-2019 Toyota 4Runner vehicles that SET modified to be equipped with a TRD wheel package. The Gross Vehicle Weight Rating (GVWR) on the certification label may be incorrect, possibly resulting in the vehicle being overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." | An overloaded vehicle can increase the risk of a crash. | SET will notify owners and mail them corrected certification labels, free of charge. The recall began November 28, 2018. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET18A. | Oct 2018 | 2020-3 |
Are there manufacturer notices for the 2019 Toyota 4Runner?
Official records show 156 manufacturer communications on record for the 2019 Toyota 4Runner.
0 warranty 1 service campaigns 0 software/OTA
Manufacturer communications are not recalls. They can include
service bulletins, repair instructions, warranty extensions,
software updates, service campaigns, and other notices.
| Date | Type | Component | Summary | ID / document |
|---|---|---|---|---|
| Jan 2026 | Service Bulletin/Repair Instructions | UNKNOWN OR OTHER | Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. | 11028712 |
| Aug 2025 | Service Bulletin/Repair Instructions | ELECTRICAL SYSTEM | Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. | 11022964 |
| Jun 2025 | Service Campaign | ELECTRICAL SYSTEM | The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks. | 11020657 |
| Jan 2025 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | Some 2019 – 2024 model year 4Runner vehicles may exhibit a cracking noise from the driver and/or passenger front seat cushion track. This condition may occur when the front seat cushion track is at the rearmost position. | 11014178 |
| Dec 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. | 11012743 |
| Dec 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout. | 11012742 |
| Dec 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. | 11012744 |
| Dec 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. | 11012735 |
| Dec 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas. | 11012727 |
| Jul 2024 | Service Bulletin/Repair Instructions | STRUCTURE:BODY | Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process. | 11007455 |
What are the most common 2019 Toyota 4Runner complaints?
UNKNOWN OR OTHER 8
FUEL SYSTEM, GASOLINE 6
AIR BAGS 5
FUEL/PROPULSION SYSTEM 5
STEERING 5
POWER TRAIN 4
SERVICE BRAKES 3
SUSPENSION 3
ELECTRICAL SYSTEM 2
ELECTRICAL SYSTEM,ENGINE 2
64 total complaints on record
How much does the 2019 Toyota 4Runner cost in fuel?
Estimated annual cost $2,904 $242/month at 12,000 miles/year
Effective efficiency 18.6 MPG
Energy used 645 gal/yr
Price assumption $4.50 $/gal
Assumptions: 17 city / 21 highway / 18 combined MPG · Regular Gasoline · efficiency ratings from official public data when available · fuel price default: official public data (U.S. average, Jun 3, 2026)
479 g/mi CO2Fuel score 3/10Smog 3/10