Vehicle report

2018 Toyota Tundra

Recalls, consumer complaints, safety ratings, fuel cost estimate, and next steps from official public data sources.

2018 Toyota Tundra
9 Total recalls
Dec 23, 2021 Latest recall date
97 Complaint reports
$3,259 Estimated fuel cost
Quick answer: The 2018 Toyota Tundra has 9 official recalls and 97 consumer complaints in our database. The latest recall date is Dec 23, 2021. The most common complaint categories include fuel/propulsion system, service brakes, electrical system. Estimated annual fuel cost is $3,259 based on the current calculator assumptions.

Buyer interpretation

What this record means before you buy

The useful question is not just whether this page has records. It is what those records should make you verify before money changes hands.

Recall homework

There are 9 official recalls listed for this model year. Before buying, use the VIN to confirm which campaigns are still open and ask for dealer repair records on completed work.

Owner complaint pattern

Owner complaints most often mention fuel/propulsion system, service brakes, electrical system. Scan those categories before the test drive so you know what symptoms, warning lights, or service history to ask about.

Service bulletin signal

227 manufacturer communications are listed. These are not recalls, but they can reveal repair instructions, warranty extensions, software notices, or known service patterns.

Ownership-cost check

The fuel-cost estimate is based on a representative EPA match, not every trim. Confirm the actual engine, drivetrain, and tire setup before comparing this listing with another year or model.

Questions to ask the seller

  • Can you show the current VIN recall status for this 2018 Toyota Tundra?
  • Do you have dealer invoices or campaign paperwork for the listed recall repairs?
  • Have you noticed any issues related to fuel/propulsion system, service brakes, electrical system?
  • Can I review recent maintenance records before the test drive?
Used-car checklist

Thinking of buying this vehicle?

Use our buyer checklist to know what to inspect, ask, and verify before the test drive.

2018 Toyota Tundra Regular Gasoline
Create checklist Compare with other years Sends year, make, and model to pre-fill your checklist.

Safety ratings

Official safety ratings were found for 4 tested variants of the 2018 Toyota Tundra.

Overall 4/5 stars
Frontal crash 4/5 stars
Side crash 5/5 stars
Rollover 3/5 stars

Displayed variant: 2018 Toyota Tundra PU/EC 2WD ; rollover risk 21.9%

Safety ratings can vary by tested body style, trim, drivetrain, or variant. Do not assume every trim has the same rating unless the official record says so.
Variant Overall Front Side Rollover
2018 Toyota Tundra PU/EC 2WD Default 4/5 stars 4/5 stars 5/5 stars 3/5 stars
2018 TOYOTA TUNDRA PU/CC 4WD 4/5 stars 4/5 stars 5/5 stars 4/5 stars
2018 Toyota Tundra PU/CC 2WD 4/5 stars 4/5 stars 5/5 stars 3/5 stars
2018 Toyota Tundra PU/EC 4WD 4/5 stars 4/5 stars 5/5 stars 4/5 stars

How many recalls does the 2018 Toyota Tundra have?

Verify with official VIN lookup

9 official recalls on record for the 2018 Toyota Tundra. 61 matched quarterly completion reports are available.

Latest recall: December 23, 2021

Recall data is based on official records. This page is not an official VIN recall check. Always confirm open recalls with an official VIN lookup, the manufacturer, or an authorized dealer. Completion reports are campaign-level, delayed, and not VIN-specific.
Campaign Component Summary Consequence Remedy Date Completion
21E103000 STEERING:HYDRAULIC POWER ASSIST SYSTEM Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak. An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash. Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01. Dec 2021 2023-4
119 remedied / 151 involved (78.8%)
21V920000 STEERING:HYDRAULIC POWER ASSIST SYSTEM Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak. An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash. Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10. Nov 2021 2023-4
20,475 remedied / 22,462 involved (91.2%)
21V688000 EXTERIOR LIGHTING:HEADLIGHTS Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2021 Tundra vehicles. The headlight electrical circuits may power the high and low beams simultaneously, which could overheat the electrical connector. An overheated electrical connector can increase the risk of a fire. Dealers will modify the engine wire harness assembly and replace any damaged bulb, bulb connector, and/or headlight assembly as necessary, free of charge. Owner notification letters were mailed April 25, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB06 and 21TA06. Sep 2021 2024-1
109,744 remedied / 158,489 involved (69.2%)
20V410000 EXTERIOR LIGHTING:TURN SIGNAL Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2020 Toyota Tundra vehicles equipped with LED headlight assemblies. Due to a wiring error, the front turn signals may not flash brightly enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." If the turn signals or hazard lamps do not flash brightly enough, other drivers may fail to see that the turn signal or hazard lamp functions have been activated, increasing the risk of a crash. Toyota will notify owners, and dealers will modify the wire harness connected to the front turn signal bulbs free of charge. The recall began August 17, 2020. Owners may contact Toyota customer service at 1-800-270-9371. Toyota's number for this recall is 20TB12/20TA12. Jul 2020 2022-2
158,664 remedied / 183,397 involved (86.5%)
20V012000 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP Toyota Motor Engineering & Manufacturing (Toyota) recalled certain 2018-2019 4Runner, Highlander, Camry, Land Cruiser, Sequoia, Sienna, Tacoma and Tundra, and Lexus RC 300, RC 350, GS 350, GX 460, IS 300, LC 500, LS 500, LX 570, RX 350L, and 2019 Toyota Avalon and Corolla, and certain Lexus NX 300, and ES 350 vehicles on January 13, 2020. On March 4, 2020, Toyota expanded the recall to include certain 2014-2015 Toyota 4Runner and Land Cruiser, 2018 Avalon, Corolla, 2014 FJ Cruiser, 2017 Sienna and Lexus 2018 ES 350, 2018-2019 GS 300, 2013-2014 GS350, 2014-2015 GX 460, IS 350 and LX 570, 2014 IS F, 2018-2019 IS 350, LC 500H and LS 500H, 2013-2015 LS 460, 2015 NX 200T and RC350, 2017 RC 200T and RX 350. Toyota also removed the 2018-2019 Toyota 4Runner and Land Cruiser and 2018-2019 Lexus GX 460 and LX 570 and 2019 NX300 from inclusion in this recall. On March 19, 2020, Toyota expanded the recall to include 2015 Lexus GS350 vehicles. The low-pressure fuel pump inside the fuel tank may fail. If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash. Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20TB02 and 20TA02 for Toyota vehicles and 20LB01 and 20LA01 for Lexus vehicles. Jan 2020 2022-1
1,540,470 remedied / 1,830,752 involved (84.1%)
18V711000 EQUIPMENT:OTHER:LABELS Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Toyota Tundra vehicles. The accessory all-weather floormats may have been counted twice when creating the load carrying capacity modification label, resulting in the capacity modification label incorrectly overstating the additional weight by 10 pounds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." Since the incorrect label is not within 1% of the additional weight, the vehicles are not compliant with the FMVSS. All vehicle owners will be sent a corrected label. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0Z. Oct 2018 2020-1
508 remedied / 508 involved (100%)
18V685000 ELECTRICAL SYSTEM:SOFTWARE Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Toyota Tundra and Sequoia vehicles and 2019 Toyota Avalon and Avalon Hybrid vehicles. The air bag electronic control unit (ECU) may erroneously detect a fault during the vehicle start-up self check. If this occurs, the ECU may not deploy the airbags as intended, in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection," and 214, "Side Impact Protection." If the air bags do not deploy as intended, it can increase the risk of injury in a crash. Toyota will notify owners, and dealers will update the software for the air bag ECU, free of charge. The recall began October 26, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0X. Note: 18V-122 was superseded by this recall. The software remedy also includes the updates to the software for 18V-122. Oct 2018 2020-1
157,443 remedied / 168,187 involved (93.6%)
18V122000 ELECTRONIC STABILITY CONTROL (ESC) Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Tundra and Sequoia vehicles. Electrical interference within the power supply circuit may cause the vehicle's electronic stability control system to be deactivated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems." Deactivation of the vehicle stability control system can increase the risk of a crash in certain conditions. Toyota will notify owners, and dealers will update the vehicle's software, free of charge. The recall began March 14, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0H. Note: This recall has been superseded by 18V-685. The software remedy for 18V-685 includes the updates to the software for this recall. Feb 2018 2018-3
54,353 remedied / 64,901 involved (83.8%)
17V831000 EQUIPMENT:OTHER:LABELS Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017-2018 Toyota 4Runner and Tundra, 2018 Toyota Highlander, RAV4 and Lexus GX460 and 2017 Toyota Sienna and Tacoma vehicles. These vehicles may have incorrect load carrying capacity modification labels. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." An incorrect load information label can result in the operator overloading the vehicle and increasing the risk of a crash. Toyota will notify owners and provide them with corrected labels, free of charge. The recall began on January 23, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are H0Z for Toyota vehicles, and HLF for Lexus vehicles. Dec 2017 2019-2
604 remedied / 649 involved (93.1%)

Are there manufacturer notices for the 2018 Toyota Tundra?

Official records show 227 manufacturer communications on record for the 2018 Toyota Tundra.

0 warranty 1 service campaigns 0 software/OTA

Common components: EQUIPMENT (57), EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL (37), ELECTRICAL SYSTEM (32), STRUCTURE:BODY (24), FORWARD COLLISION AVOIDANCE (18)

Manufacturer communications are not recalls. They can include service bulletins, repair instructions, warranty extensions, software updates, service campaigns, and other notices.
Date Type Component Summary ID / document
Jan 2026 Service Bulletin/Repair Instructions UNKNOWN OR OTHER Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. 11028712
T-SB-0055-24 Rev2
Aug 2025 Service Bulletin/Repair Instructions ELECTRICAL SYSTEM Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low. 11022964
T-TT-0790-25
Jun 2025 Service Campaign ELECTRICAL SYSTEM The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks. 11020657
T-SB-0058-23 Rev1
Dec 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. 11012743
T-SB-0038-24 Rev2
Dec 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. 11012744
T-SB-0039-24 Rev2
Dec 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout. 11012742
T-SB-0035-24 Rev2
Dec 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. 11012735
T-SB-0061-23 Rev2
Dec 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas. 11012727
T-SB-0062-23 Rev2
Jul 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process. 11007455
T-SB-0055-24 Rev1
Jul 2024 Service Bulletin/Repair Instructions STRUCTURE:BODY Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process. 11006161
T-SB-0055-24 Rev1

What are the most common 2018 Toyota Tundra complaints?

97 total complaints on record

How much does the 2018 Toyota Tundra cost in fuel?

Estimated annual cost $3,259 $272/month at 12,000 miles/year
Effective efficiency 16.6 MPG
Energy used 724 gal/yr
Price assumption $4.50 $/gal

Assumptions: 15 city / 19 highway / 16 combined MPG · Regular Gasoline · efficiency ratings from official public data when available · fuel price default: official public data (U.S. average, Jun 3, 2026)

554 g/mi CO2Fuel score 2/10Smog 3/10

Model-year comparison